Wednesday, October 25, 2017

POULAN PRO RIDING MOWER



The POULAN PRO RIDING MOWER P54ZX is ideal for big lawns with lots of obstacles because of the mower’s superior maneuverability and speed. It also has a powerful engine with a big fuel tank and comfortable seating for even long mowing sessions.

24 HP Briggs v-twin pro engine
If you’re looking for a powerful engine, the Briggs v-twin pro definitely fits that definition. It’s a commercial-grade engine with quiet operation and 24 horsepower. Even if your yard is full of debris like twigs and tough grass, or has lots of hills, the Briggs has the muscle.

54-inch reinforced deck

The cutting deck is where the magic happens. The deck houses the mower’s blades and determines how wide of a cutting width the mower has. The Poulan Pro’s cutting deck is 54 inches and made of sturdy, reinforced steel. You also have the power to choose your cutting height between 1.5-inches all the way up to 4-inches.

Hydro gear EZT transmission

Actually driving the lawn mower is butter-smooth with the hydro gear EZT transmission. You control each wheel independently so you can easily go in any direction using the controls. With the zero-turn tech, going around trees and right up close to the edges of flower beds is also extremely smooth and easy.

Strengths

Fast mowing

Mowing your lawn won’t take nearly as long as it used to when you use this mower. The zero-turn technology and powerful engine allow you to maneuver around obstacles much faster than before and mow more efficiently. The P54ZX can mow about 2.8 acres in one hour.

Big fuel tank

Another positive to the Poulan Pro 967331001 is the tank. It holds up to 3.5 gallons of gas so you don’t have to refill as often, and can get quite a few mowing sessions under your belt before you have to pick up more gas.

Comfortable
Mowing for an hour or more can make you stiff and sore. The makers of this mower have anticipated this problem and made the 15-inch, extra high back seat and foam-padded control grips for increased comfort. You’ll feel secure and comfy as you cut your lawn.

Weaknesses

Bad for the environment

The main issue with the Poulan Pro is that it isn’t CARB compliant. This means it doesn’t meet the requirements to be considered a lower-emission lawn mower. Depending on who you are, this isn’t a major issue, but the mower does emit a lot of pollution which can reduce air quality.

Overall Review

The Poulan Pro P54ZX is very powerful and fast. With features like the hydro gear EZT transmission, you can smoothly navigate the mower around trees and other obstacles without wasting precious mowing time. You can cut any kind of grass and any kind of terrain (hilly, flat, uneven) much quicker than with mowers that aren’t zero-turn, for big lawns this is a great commercial riding mower to consider.

Tuesday, August 29, 2017

Garmin Fenix 3


What is the Garmin Fenix 3?


The Garmin Fenix 3 is a serious runner’s watch. It’s big, it’s expensive and makes a pretty bold design statement on your wrist. But it’s also great.
As well as offering GPS tracking for runners and cyclists, the Garmin Fenix 3 has specific modes for other sports and exercise, including skiing. It also adds full notifications and has its own app store, meaning even dedicated exercise-obsessed tech heads won’t need to invest in both a running watch and a smartwatch.

On the smartwatch side in particular, it isn’t quite a direct replacement for an Apple Watch or Android Wear watches. But it absolutely decimates all non-dedicated exercise watches in terms of activity tracking.

Garmin Fenix 3 – Design and Screen


The Garmin Fenix 3 sits right at the top of the Garmin sport watch lineup. It lives roughly alongside the Forerunner 920XT, a slightly smaller, square-faced model designed primarily for triathlon runners.

This is more an all-purpose outdoors watch, with dedicated modes for hiking and skiing as well as cycling, running and swimming. Also, it has a design that threatens to engulf the wrists of all but the manliest of forest rangers. The Garmin Fenix 3 is larger even than the Forerunner 920XT and Fenix 2, with a watch face that protrudes 16.7mm from your wrist.

It’s big. And while we’re against the idea of specific gadgets being “for men” or “for women”, Garmin seems to have a predominantly male audience in mind for this one.



Given the imposing dimensions, though, I think you’ll find the Fenix 3 surprisingly comfortable. Thanks to its reasonable weight, it won’t disappear on your wrist like its dinky brother, the Garmin Vivoactive, but it’s comfortable enough to wear all day.


I did tend to take it off while typing at a desk, however – and generally when sleeping too (even though it offers auto sleep tracking).


The latter is a personal thing, but since the watch face is quite chunky, it can tend to get in the way a bit more than an “ordinary” watch.

Its styling most closely resembles a diver’s watch, which may appeal if you’re not a fan of the running watches that appear to be more mini-computer for the wrist – such as the other top Garmin models. Suitably enough, it’s waterproof to 100m, just like any respectable diving watch.


It isn’t an all-metal design: Only the rim and buttons are metal. But the plastic casing feels incredibly tough, clearly a higher grade of material than you’re likely to see in the average fitness tracker. It’s “fiber-reinforced polymer”. Very fancy.

Given how hardy it looks it was disappointing to find the Garmin Fenix 3’s standard watch face scratch-proofing isn’t up to the job. The watch arrived to us with quite a pronounced scratch across the middle of its display, having clearly suffered rough treatment elsewhere already.


Although Garmin doesn’t state exactly what kind of toughened glass the Fenix 3 watch face uses, judging by the display finish and that great big scratch, it’s unlikely it’s Gorilla Glass 4.

The company does actually makes a special, super-hard version of the watch with a Sapphire Crystal top layer. This is worth considering now that you can pick one up for as little as £360; it also comes with an extra metal link band. However, given how much weight this would add to the watch, we’d prefer to stick with the rubbery strap
The default strap has clearly been designed with exercise in mind. It uses a standard, non-clap design, with holes pitted throughout that double as ventilation.

Back to the front, the Garmin Fenix 3’s screen is similar to the one featured on the Garmin Vivoactive. It’s a low-power LCD panel, and its advantage over the screen on the Fenix 2 is colour. This isn’t deep and rich colour, the kind you might find on an LG Urbane, but it helps to give the interface more visual interest, particularly when viewing all those graphs.

In terms of screen character, it’s somewhat similar to the E Ink displays of Amazon Kindles, or the screen of a calculator. While not flashy, it’s practical since the display can remain on 24/7 while consuming very little power.

The downside is that the Fenix 3 screen isn’t natively visible without ambient light. However, a bright built-in watch light is included. As standard it comes on when you press the dedicated light button on the side, but you can also switch it to turn on when you press any button, or even waggle your wrist. Contrast is a little low without the light on, lacking clarity in low-level indoor lighting or worse.

While not dazzling, in general this is a great screen that performs the functions of telling the time and constant activity tracking without killing the battery.

Garmin Fenix 3 – Battery life


Battery life is excellent. I’ve been using it rather generally: an hour of tracking here and there; for notifications; and as a watch. Having charged the Fenix 3 just under a week ago, I was down to 56% of battery life.

Compared to more insubstantial running watches and almost any other smatwatch, this is a great result. However, stamina is similar to that of the Forerunner 920XT. According to Garmin’s figures, the Fenix 3 will last for up to 20 hours with full GPS tracking or 50 hours of lower-intensity hiking tracking. Or five weeks as a plain old watch.

Friday, July 28, 2017

A Common Misunderstanding About SEO

I really don't think it's fair to describe the industry as a complete without figuring out what is wrong with it and how New York City SEO company can conquer it. Just how exactly do we determine what's good and bad about the industry? I've now been involved with the internet for over 10 years and, specifically, with the best local SEO company for almost 4 years and I've seen the inner workings of major search engine optimization firms and worked with customers that had been burnt with their previous local SEO agencies. Combined with numerous Internet postings and discussion debates speaking about the same basic problems, I have compiled a listing of the most common troubles.
seo new york ny

Responsibility for Outcomes

It is no secret that the vast majority of search engine optimization companies have no responsibility for outcomes. It's a simple fact that no affordable SEO company can guarantee results (and if they do, they are lying to you personally). Additionally it is true that the customer is taking a risk by spending money with an search engine optimization company that basically says 'We will do what we can'. Search engine optimization companies simply guarantee they will do the job to 'optimize' the site, but without complete disclosure of the methodology, what exactly is the customer paying for? No other business sells a product without any guarantees and no particular list of work that will be completed. Needless to say, SEO New York company work is essentially the revenue of information and keeping the particulars of a methodology is vital, but the combo of secrecy and no obligation for results really makes SEO New York NY insecure. So, how do an search engine optimization company reduce the risk for the customer and provide the best grade of support?

Incentive Based Pricing

The only real way to decrease the financial risk of this customer would be to discuss the risk. Through incentive-based pricing, the SEO New York NY may control a certain percentage of the total contract (say 70%) to pay their intellectual property and period while placing the rest of the contract cost (staying 30%) in incentives for success. Needless to say, incentives and their percentage of the contract would be wholly relative based on the effort. This first step into sharing at the danger provides both reassurance to the customer that the provider believes in its own methodology and puts a number of the fiscal burden of the campaign on the search engine optimization company. At the moment, however, very few SEO New York NY companies are willing to share in the risk and charge exactly the same cost whether the customer gets high rankings or no rankings at all (or even lower positions).

Wednesday, July 5, 2017

How to Give Up Smoking Cigarettes

Marijuana smoking is a custom where tobacco is burnt along with its vapors are stained or inhaled along with the active compounds are consumed through the alveoli in the lungs that activate chemical reactions in nerve endings resulting in an increase from the coronary heart speed.

Smoking is a terrible habit and it calms the men and women who do use vaporizers. Approximately 4.9 million people die each year due to vaporizers for sale. Scientists revealed quite a while past a link between smoking and lung cancer.

You will discover a whole lot of means of giving up smoking however not one of them is able to work if you are not a business in your center which you really should stop. You can follow these Simple steps in Providing Smoking smoking:-
vaporizers

Create a list of reasons which you are considering about consuming and receive a strong willpower to prevent smoking.
As opposed to trying to give up annually on a specific day, pick a particular supply up a day of each week. That will provide you 52 opportunities in a calendar year instead of just one and consequently give you more opportunities to be successful.
Do not smoke the exact same brand as it is not your special individual "No Pot Smoking Day". The various flavors and substances might make smoking less pleasurable.
Eliminate all tobacco products out of your home and office and don't dare to maintain a package of smokes around you because it can force you to start smoking.
Locate a physician to aid you to give up smoking. Nicotine replacement treatment, Nicotine patches, nicotine gum, nicotine sprays and inhalers, vaporizers e cigarette, ginseng, Cold Turkey, Hypnotherapy, laser apparatus therapy, vaporizers shop smoking cessation(great source of technical advice and assistance to vaporizers e liquid smoking and consuming), and NHS Stop smoking solutions, Microtab, Lozenge, Inhalator are several methods that could assist you. Also, seek advice from your physician to prescribe drugs that will assist you to stop smoking.
Kick the very first week of stopping by employing vaporizers shop replacements like mints, sunflower seeds, toothpicks etc..
Know some details concerning smoking. Research on the net and discover what's going to occur to smokers afterward in the lifetime and the truth of any give smoking smoking smoking alternative or technique that's much more effective than others.
The cravings may also be prevented by doing pushups or cleaning your teeth.
Always feel confident and be sure you could stop. Believe you can and you can get it done.
Attempt quitting smoking for 30 days. Continue telling yourself that you may return to smoking shortly then a month. However, if the couple ends, don't go back vaporizers smoking and get started dismissing it for a different month.
Do not compel to quit but watch yourself and the tradition of smoking for seven days typically because you generally do. You'll be disgusted on your own.
If you believe you're in a position to quit smoking then melt down how it seems to write the actions that you took when you began consuming vaporizers smoking from start to finish.
To prevent smoking you ought to be really determined and optimistic of giving up and when you find out a lifetime without smoking, then you are going to discover that life is more beautiful without the clouds of smoke.

Monday, June 19, 2017

Balance-of-System Equipment Required for Renewable Energy Systems



Both grid-connected and off-grid home renewable energy systems require additional “balance-of-system” equipment.

Whether you decide to connect your home renewable energy system to the electric grid or not, you will need to invest in some additional equipment (called "balance-of-system") to condition the electricity, safely transmit the electricity to the load that will use it, and/or store the electricity for future use.  Today there is a lot of solar systems on the market but RENOGY 100W is ideal for camping and traveling.

With stand-alone systems -- those not connected to the electric grid -- the amount of equipment you will need to buy depends on what you want your system to do. In the simplest systems, the current generated by your system is connected directly to the equipment that it is powering (load). However, if you want to store power for use when your system isn't producing electricity, you will need to purchase batteries and a charge controller.


Depending on your needs, balance-of-system equipment for a stand-alone system could account for half of your total system costs. Your system supplier will be able to tell you exactly what equipment you will need for your situation, but typical balance-of-system equipment for a stand-alone system includes batteries, charge controller, power conditioning equipment, safety equipment, and meters and instrumentation.



A grid-connected system -- one that is connected to the electric grid -- requires balance-of-system equipment that allows you to safely transmit electricity to your loads and to comply with your power provider's grid-connection requirements. You will need power conditioning equipment, safety equipment, and meters and instrumentation.
Batteries for Stand-Alone Systems

Batteries store electricity for use during times that your system is not producing electricity (the resource is not available). Batteries are most effective when used in wind and photovoltaic systems (variations in microhydropower resources can be more seasonal in nature, so batteries may be less useful).

The "deep-cycle" (generally lead-acid) batteries typically used for small systems last 5 to 10 years and reclaim about 80% of the energy channeled into them. In addition, these batteries are designed to provide electricity over long periods, and can repeatedly charge and discharge up to 80% of their capacity. Automotive batteries, which are shallow-cycle (and therefore prone to damage if they discharge more than 20% of their capacity), should not be used.

The cost of deep-cycle batteries depends on the type, capacity, climate conditions under which they will operate, frequency of maintenance, and chemicals used to store and release electricity. Wind or photovoltaic stand-alone system batteries need to be sized to store power sufficient to meet your needs during anticipated periods of cloudy weather or low wind. An inexpensive fossil fuel-powered back-up generator can be used to cover unanticipated or occasional slumps in the renewable resource.

For safety, batteries should be located in a space that is well ventilated and isolated from living areas and electronics, as they contain dangerous chemicals and emit hydrogen and oxygen gas while being charged. In addition, the space should provide protection from temperature extremes. Be sure to locate your batteries in a space that has easy access for maintenance, repair, and replacement. Batteries can be recycled when they wear out. Contact your system supplier for information on sizing your battery pack to meet your specific needs.
Charge Controllers for Stand-Alone Systems

This device regulates rates of flow of electricity from the generation source to the battery and the load. The controller keeps the battery fully charged without over-charging it. When the load is drawing power, the controller allows the charge to flow from the generation source into the battery, the load, or both. When the controller senses that the battery is fully (or nearly fully) charged, it reduces or stops the flow of electricity from the generation source, or diverts it to an auxiliary or "shunt" load (most commonly an electric water heater).

Many controllers will also sense when loads have taken too much energy from batteries and will stop the flow until sufficient charge is restored to the batteries. This last feature can greatly extend the battery's lifetime.

The cost of controllers generally depends on the ampere capacity at which your renewable system will operate and the monitoring features you want.
Power Conditioning Equipment

For both stand-alone and grid-connected systems, you will need power conditioning equipment.

Most electrical appliances and equipment in the United States run on alternating current (AC) electricity. Virtually all the available renewable energy technologies, with the exception of some solar electric units, produce direct current (DC) electricity. To run standard AC appliances, the DC electricity must first be converted to AC electricity using inverters and related power conditioning equipment.

There are four basic elements to power conditioning:
Conversion -- of constant DC power to oscillating AC power
Frequency of the AC cycles -- should be 60 cycles per second
Voltage consistency -- extent to which the output voltage fluctuates
Quality of the AC sine curve -- whether the shape of the AC wave is jagged or smooth.

Simple electric devices, such as hair dryers and light bulbs, can run on fairly low-quality electricity. A consistent voltage and smooth sine curve are more important for sensitive electronic equipment, such as computers, that cannot tolerate much power distortion.

Inverters condition electricity so that it matches the requirements of the load. If you plan to tie your system to the electricity grid, you will need to purchase conditioning equipment that can match the voltage, phase, frequency, and sine wave profile of the electricity produced by your system to that flowing through the grid.





A series of requirements for grid-interactive inverters have been developed by Underwriters Laboratories, a leading safety-testing and certification organization. These requirements, referred to as UL 1741, apply to power-producing stand-alone and grid-connected renewable energy systems. Either you or your installer should contact your power provider to see which models they accept for grid-connection; most simply require a grid-interactive inverter listed by an organization such as Underwriters Laboratories.

These factors affect the cost of inverters:
Application (utility-interconnected, stand-alone, or both)
Quality of the electricity it needs to produce for stand-alone
Voltage of the incoming current
AC wattage required by your loads (for stand-alone systems only)
Power required for the starting surge of some equipment
Additional inverter features such as meters and indicator lights.

When you size your inverter, be sure to plan for any future additional loads you might have. In the case of a grid-tied system in which you want to enlarge your renewable energy system, it is often cheaper to purchase an inverter with a larger input and output rating than you currently need than to replace it with a larger one later.
Safety Equipment

Safety features protect stand-alone and grid-connected small renewable energy systems from being damaged or harming people during events like lightening events, power surges, or malfunctioning equipment.

Safety disconnects -- Automatic and manual safety disconnects protect the wiring and components of your small renewable energy system from power surges and other equipment malfunctions. They also ensure that your system can be shut down safely for maintenance and repair. In the case of grid-connected systems, safety disconnects ensure that your generating equipment is isolated from the grid, which is important for the safety of people working on the grid transmission and distribution systems.
Grounding equipment -- This equipment provides a well-defined, low-resistance path from your system to the ground to protect your system against current surges from lightening strikes or equipment malfunctions. You will want to ground both your wind turbine or photovoltaics unit itself and your balance-of-system equipment. Be sure to include any exposed metal (such as equipment boxes) that might be touched by you or a service provider.
Surge protection -- These devices also help protect your system in the event that it, or nearby power lines (in the case of grid-connected systems), are struck by lightening.

A local electrician or your installer should be able to provide you with more information on the safety features required for your particular situation. For additional information on safety and electrical installation requirements, consult the National Electric Code NFPA 70.
Meters and Instrumentation

Meters and other instruments allow you to monitor your small renewable energy system's battery voltage, the amount of power you are consuming, and the level at which your batteries are charged, for example.

If you are connecting your system to the electricity grid, you will need meters to keep track of the electricity your system produces and the electricity you use from the grid. Some power providers will allow you to use a single meter to record the excess electricity your system feeds back into the grid (the meter spins forward when you are drawing electricity, and backward when your system is producing it).

Power providers that don't allow such a net metering arrangement require that you install a second meter to measure the electricity your system feeds into the grid.

Saturday, March 18, 2017

Roswell’s Historic Bulloch Hall gets covered in quilts for annual quilt guild showcase

Rooms of Historic Bulloch Hall in Roswell will be decorated with handcrafted patchwork quilts beginning on March 10 to 19 for the Great American Cover-up Quilt Show.

This year marks the 35th annual quilt show, organized and hosted by the Bulloch Hall Quilt Guild with co-chairs, Ellen Lott and Bobette Robinson at the helms.

At last count by the guild, there are 145 quilt submissions.

According to submission guidelines, placement of quilts in the show will be at the discretion of the quilt show committee.

“A committee meets after all the quilt applications have been received. You must submit a photo along with the dimensions of the quilt, then with that information, the group decides which room to place which quilt,” said Jan Antranikian, guild representative.

Antranikian describes placement as a challenge with the committee having “to consider not only the size, but the paint color of the room and even the amount of light in each room.”

Quilts are placed on three of the four levels of the historic home.

“We do have the advantage of having beds, tables and sofa's to drape quilts over and small little quilts get stuck into the nooks and crannies of the house,” she said.

Submissions include works from members of the Bulloch Hall Quilt Guild, but non-members had the opportunity to apply to be featured.

Each year features a spotlight on a quilt artist. Fiber Artist Elizabeth Barton of Athens will showcase her paint and patchwork style of quilting.

“I make wall hangings from layers of cloth that I have painted or dyed, cut into pieces and reassembled. It’s like painting with fabric, the benefit of the fabric being that if you don’t like it in one place, you can move it to another,” said Barton.

Barton, a native of England who immigrated to the United States, began making quilts while working in the health service at the University of Georgia. She chose to focus on art quilts.

The special display will exhibit 13 of Barton’s quilts.

Bulloch Hall Quilt Guild will host a “Meet and Greet Reception” with Barton on March 19 from 2 to 4 p.m.

Each year the guild selects on particular quilt as the “Raffle Quilt,” which will be available for anyone to win.

Raffle tickets are $1 each or 6 for $5.

According to Co-chair Bobette Robinson, about 25 people collaborated on this year’s raffle quilt, which was on display on March 2 at the guild’s meeting.

The guild holds monthly meetings beginning in September and going through June at Prince of Peace Lutheran Church in Alpharetta on the first Thursday of the month.

Ladies met at the church to share current works and quilting happenings as well as emphasis on donations of handcrafted works.

The guild selects nonprofit organizations to receive donations of quilts as “one arm of our charity efforts.”

“This year, we have again chosen two groups to receive our quilts: The Drake House in Roswell and the Quilts of Valor,” as stated on its website.

A special presentation was given by Gwen Koehler, who has published works on the love story between Mittie Bulloch and the elder Theodore Roosevelt.

There will be a preview party at Bulloch Hall the evening before the show opening.

Awards are given for “Guild Choice” “Viewer’s Choice,” in addition to a "Sponsor Award."

The exhibit runs from March 10 to 19 at Bulloch Hall.

Hours are Monday through Saturday from 10 a.m. to 4 p.m. and Sunday 1 to 4 p.m.

Tickets: $8 per adult and $6 per child ages 6-12 years old.

Wednesday, March 8, 2017

Plumber Retains Job After Blowing Jackpot Earnings On Golden Plumbing Fixtures



LOS ANGELES, CA — Local Plumber, Joe Schweddy (56), used his jackpot earnings he received in March to trick out his bathroom in gold instead of retiring or doing more sensible things. KWLA News caught up with Joe after rumor spread throughout the city of his spending. The following is a brief exchange we had.

Thursday, March 2, 2017

Plumbing VS. Gangs


Unless you’ve stayed up all night studying capital cities for a pub quiz, it’s safe to say you won’t have heard of Puerto Cabezas, the small, but bustling, urban centre of the North Caribbean Coast Autonomous Region of Nicaragua.

The city, better known as Bilwi in the local Miskito language, can be a tough place to live. Power outages are rampant and road access is patchy, schools are overcrowded and the costs of basic supplies can be exorbitant. For Bilwi’s youth, the traps of drugs and gang violence are all too easy to get caught up in.

Surrounded by rivers and lagoons and facing out on to an Atlantic sea-scape, good water, ironically, is hard to come by. Just 20% of Bilwi can tap into the limited municipal water supply, with public waterways and streams visibly polluted. Only half of the city’s population has access to toilets.


Tuesday, February 14, 2017

4 Winter Plumbing Problems Dallas Doesn’t Have



Remember to pack close-toed shoes and a jacket if you head up north to visit family and friends this year. You can also be comforted in your travels this year knowing your Dallas pipes will still be running when you come home.

The holiday season usually means cold weather and a risk of freezing pipes, but in Dallas temperatures below 50 degrees are extremely rare. Lucky Dallasians have the advantage of watching most of the country freeze under a blanket of snow and ice from the comfort of their warm and sunny homes.

That doesn’t mean that Dallas gets to avoid plumbing problems all together, but here are 4 winter plumbing issues that Dallas doesn’t have to worry about.